ConLab 0-300 Volt AC Transmitter Sensor
Description
0-300 volt self-powered transformer
for monitoring sine wave, single-phase AC voltage. Requires Input Cable
for use with U12 loggers.
Feature
- Plug directly into the external input jacks of U12 and ZW Family loggers to expand the range of measurement options and applications
Spesification
The country of origin for this
product is Israel. To see the full specifications for this product,
please see our product manual found under the documentation tab if
available.
- Ranges: 0–300 volts RMS
- Sensor accuracy: < ±0.1% of span (20% to 120% of range) ±0.25% of span (10% of range)
- Over range: +20% of span
- Over load: +40% of span
- Frequency: 60 Hz AC
- Supply: Self-powered
- Output: 0–20 mA
- Response time to 90%:
- Operating conditions: -20° to 70°C (-4° to 158°F); 5-95% RH, non-condensing
- Housing: Plastic polycarbonate
- Protection Level
Box: According to IP-50 DIN 40050
Terminals: According to IP-10 DIN 40050 - Mounting: Standard 35mm DIN rail
Notes: Because these sensors tie directly into the line, they should be used only by qualified personnel.
Requirements
- For U12 & H8 Loggers: Input Cable (Part # CABLE-4-20mA)
- For HOBO Energy Logger: FlexSmart Analog Module (Part # S-FS-CVIA)
0 komentar:
Posting Komentar