Compressed Air Flow Meter - 16-200 SCFM Sensor

 

 

 

 

 

 

 

Description

The T-CDI-5200-10S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This model fits 1" steel pipes.
Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA).

• View CDI Meters' manual for T-CDI-5200-10S

Feature

• This adds the ability for users to be able to measure compressed air flow (SCFM).
• Easy to install
• Digital display

Spesification

To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Measurement range, 5200 model: 1 - 80 SCFM

Measurement range, 5400 model: 16-200 SCFM (calibrated), 350 - 600 (uncalibrated)

Accuracy: (5200 model) 5% of reading plus 1% of full scale @ air temperatures 40 - 120F

Accuracy: (5400 model calibrated range) 5% of reading plus 1% of full scale @ air temperatures 40 - 120F; (5400 model extended range) 7% of reading from rated fule scale to 150% of calibrated range, @ air temperatures 40 - 1200F

Medium: Compressed air, nitrogen

Operating pressure, 5200 model: 30 to 170 psig for best accuracy. 200 psig max on Sch 40 steel

Operating pressure, 5400 model: 200 psig max on Sch 40 steel

Input power: 250 mA @ 18 - 24 VDC

Output resistance: 400Ω max

Response time: 1 sec to 63% of final value

Output: selectable 4 - 20mA or pulse

Display: 4-digit LED

Ring material: Aluminum

Size / Weight, 5200 model: 3.2x2.2x1.6 in / approx. 1.2 lb

Size / Weight, 5400 model: 3.2x2.2x1.6 in / approx. 1.4 lb

Note: Recommended: 5200-DG (and 5400-S-DG) Drill Guide that facilitates accurately locating the holes that are needed to mount the flowmeter.