InTemp Bluetooth Low Energy Temperature (with Probe) Data Logger
Description
InTemp ® CX402-TXM (with Probe
only) data loggers monitor temperatures in refrigerators, freezers and
other temperature-controlled environments to compile with global GDP
requirements. The loggers communicate wirelessly via Bluetooth Low
Energy to mobile devices. Using the InTemp app, you can easily view
data, check logger status, set alarms, and create and share secure PDF
reports for streamlined reporting and regulatory compliance. All loggers
feature a built-in LCD display to view current and daily min and max
temperatures, advanced audible and visual alarm capabilities for
notification of temperature excursions, an internal sensor for ambient
temperature monitoring, and a single point NIST Certification of
Calibration for both the logger body and probe.
Models are available with a 2- or
4-meter external temperature probe for tracking actual refrigerator
temperatures without Glycol buffers or freezer applications.
Feature
- Easy-to-read display with current and daily min/max temperatures
- Audible and visual alarms
- Bluetooth transmission of data and alarm states
- Logger setup and download of data in seconds – without a PC or cable
- +/- 0.5C accuracy for reliable temperature readings
- Battery-powered to guard against local power loss
- NIST Certificate of Calibration
Spesification
To see the full specifications for this product, please see our product manual found under the documentation tab if available.
Logger
|
|
Radio Power
|
1 mW (0 dBm)
|
Transmission Range
|
Approximately 30.5 m (100 ft) line-of-sight
|
Wireless Data Standard
|
Bluetooth Low Energy (Bluetooth Smart)
|
Logger Operating Range
|
-30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)
|
Logging Rate
|
1 second to 18 hours
|
Time Accuracy
|
±1 minute per month at 25°C (77°F)
|
Battery Type
|
Two AAA 1.5 V alkaline or lithium batteries, user replaceable
|
Battery Life
|
1 year, typical with logging interval of 1 minute. Faster
logging intervals, remaining connected with the InTemp app, excessive
report generation, numerous audible alarms, and paging all impact
battery life.
|
Memory
|
128 KB (84,650 measurements, maximum)
|
Full Memory Download Time
|
Approximately 60 seconds; may take longer the farther the device is from the logger
|
LCD
|
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
|
Dimensions
|
9.4 x 4.5 x 2.59 cm (3.7 x 1.77 x 1.02 inches)
|
Weight
|
90.2 g (3.18 oz)
|
Environmental Rating
|
IP54
|
CE
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
|
External Temperature Probe
|
|
Range
|
-40° to 100°C (-40° to 212°F)
|
Accuracy
|
±0.5°C from -15° to 80°C (±0.9°F from 5° to 176°F)
±1.0°C from -40° to -15°C (±1.8°F from -40° to 5°F) ±0.7°C from 80° to 100°C (±1.3°F from 176° to 212°F) |
Resolution
|
0.024°C at 25°C (0.04°F at 77°F)
|
Drift
|
<0.1°C (0.18°F) per year
|
Response Time
|
Probe only: 1 minute 30 seconds typical to 90% in air moving 1 m/s
|
Cable Length
|
2 or 4 meter (6.56 or 13.12 feet) flat ribbon cable
|
Probe Dimensions
|
Food-grade stainless steel probe with pointed tip, 53.34 mm (2.1 inches) long, 3.18 mm (0.125 inches) diameter
|
Ambient Temperature Sensor
|
|
Range
|
-30° to 70°C (-22° to 158°F)
|
Accuracy
|
±0.5°C from -15° to 70°C (±0.9°F from 5° to 158°F)
±1.0°C from -30° to -15°C (±1.8°F from -22° to 5°F) |
Resolution
|
0.024°C at 25°C (0.04°F at 77°F)
|
Drift
|
<0.1°C (0.18°F) per year
|
Response Time
|
15 minutes typical to 90% in air moving 1 m/s
|
0 komentar:
Posting Komentar